---
title: "Nuticast: Xcode debugging on another Wi‑Fi or computer"
description: "Nuticast is a Mac app that keeps Xcode debugging your iPhone on a different Wi‑Fi (Tailscale, ZeroTier, Netbird) or plugged into another computer."
url: https://www.nuticast.com/
---

# Debug your iPhone in Xcode, even on another Wi‑Fi or plugged into another computer.

Nuticast is a Mac app that makes your own iPhone a normal Xcode run destination. It works on another Wi‑Fi over the Tailscale, ZeroTier or Netbird you already run, or with the iPhone plugged into another computer, a Mac or a Windows PC.

[**New** USB via computer: share a cabled iPhone](https://www.nuticast.com/usb-sharing)

[Download for Mac](https://www.nuticast.com/download/Nuticast.dmg) [Send this to my Mac](mailto:?subject=Nuticast%20for%20my%20Mac&body=https%3A%2F%2Fwww.nuticast.com%2Fdownload) Shares the download link with your Mac. [See pricing](https://www.nuticast.com/pricing)

- Free to pair
- $49/year to bridge
- 14-day refund
- No account
- Not over cellular

Wi‑Fi - Home

Xcode · Run destination

iPhone-Mike*Ready*

On a different Wi‑Fi, bridged over Tailscale. Build, install and debug as if it were local.

Nuticast 1 bridge active

Devices

iPhone-Mike**Bridge active

**Tailscale**

iphone-13-pro-max

**IP**

100.95.134.3

**Tunnel ports**

55000–58000

iPad-StudioOff · on your Wi‑Fi

Open Nuticast… `⌘O`Add Device…

Works over the mesh VPN you already run

- ![Tailscale logo](https://www.nuticast.com/images/providers/tailscale.png) Tailscale
- ![ZeroTier logo](https://www.nuticast.com/images/providers/zerotier.png) ZeroTier
- ![Netbird logo](https://www.nuticast.com/images/providers/netbird.png) Netbird
- or Manual IP

- The phone stays on Wi‑Fi
  A different Wi‑Fi from your Mac is fine. Cellular does not work.
- One mesh on both ends
  Tailscale, ZeroTier or Netbird on the Mac and the iPhone. A cable on another computer needs neither.
- Paired once
  Pair the iPhone with your Xcode Mac one time, while it is next to you.

Version 1.0.20, released 16 November 2026, 3.2 MB. Requires macOS 13.5+, Xcode 15+ and iOS 17+.

How the bridge works

## Why Xcode cannot see an iPhone on another network.

Xcode finds wireless iPhones with Bonjour, and Bonjour stays inside one network. Nuticast replays the phone’s record on your Mac and relays Xcode’s traffic over your own mesh VPN, so the phone shows up in the run destination menu and debugs as usual.

1. iPhone iPhone-Mike On a different Wi‑Fi from your Mac. Not cellular.
2. Your mesh VPN Tailscale Or ZeroTier, Netbird or a manual IP. The one you already run.
3. Your Mac Nuticast Replays the phone’s Bonjour record and relays Xcode’s traffic on tunnel ports in the 55000–58000 range, opened as Xcode needs them.
4. Xcode Run destination iPhone-Mike is listed and ready.

The Remote Wi‑Fi route, hop by hop. The phone stays on Wi‑Fi; Xcode sees it as if it were next to the Mac.

[Read the full explainer](https://www.nuticast.com/how-it-works)

Two routes

## One Xcode. Two routes to the phone.

### Remote Wi‑Fi

The iPhone sits at home or in the office, on a Wi‑Fi your Mac is not on.

- Tailscale, ZeroTier or Netbird on the Mac and the iPhone, or a manual IP
- The iPhone on Wi‑Fi, not cellular
- A license on the Xcode Mac, $49/year

[How Remote Wi‑Fi works](https://www.nuticast.com/how-it-works)

![The Nuticast device page: the Bonjour service name, host and RemotePairing port, and the Tailscale device, IP and tunnel port range](https://www.nuticast.com/images/app-ui/main-window.png)

### USB via computer

The iPhone is plugged into another computer: a Mac mini on a shelf, a teammate’s Mac or a Windows PC.

- Nuticast on the Mac with the cable
- The iPhone needs no Wi‑Fi and no VPN
- No license on the Mac with the cable

[How USB Sharing works](https://www.nuticast.com/usb-sharing)

![Nuticast USB Sharing with the bridge active between two Macs and an iPhone](https://www.nuticast.com/images/usb/usb-4-bridge-active.webp)

### Remote Wi‑Fi and USB via computer compared

| Compared on | USB via computer | Remote Wi‑Fi |
| --- | --- | --- |
| Where the phone is | Plugged into another computer: a Mac mini on a shelf, a teammate’s Mac or a Windows PC. | On a different Wi‑Fi from your Mac. |
| What the phone needs | A data cable. No Wi‑Fi and no VPN. | Wi‑Fi (cellular does not work) and the same mesh VPN as your Mac: Tailscale, ZeroTier or Netbird, or a manual IP. |
| What links it to your Mac | The two Macs reach each other, over a mesh VPN or the local network. | Your mesh VPN, between your Mac and the iPhone. |
| Which Mac needs a license | Only the Mac with Xcode ($49 per year, or $80 per seat per year on Team). The Mac with the cable runs USB Sharing for free. | The Mac with Xcode ($49 per year). |
| What Xcode sees | A normal run destination. It builds, installs and debugs over the other Mac’s cable. | A normal wireless run destination. Nuticast replays the phone’s Bonjour record and relays Xcode’s traffic over your mesh. |

Running an AI coding agent on the Xcode Mac? [`nuticast mcp` lets Claude Code or Codex build to the phone.](https://www.nuticast.com/ai-agents)

The app

## What the Nuticast app does for you.

**Nuticast shows each iPhone’s state.**

Nuticast labels every phone Off, Pairing, Bridge active or Error, instead of a silent Xcode failure.

**Nuticast restores the bridge on its own.**

When your Mac changes Wi‑Fi or the VPN reconnects, Nuticast restarts the active bridge.

**Nuticast finds your mesh devices.**

Nuticast discovers Tailscale and Netbird devices through their command line. For ZeroTier, paste the device’s IP.

**Nuticast lists its tunnel ports.**

The tunnel ports, 55000–58000, are listed in the app, so you can see what Xcode is talking to.

![The Nuticast device page: Mike’s iPhone with Bridge active and the live path to the Mac, above its Bonjour service name, host and RemotePairing port](https://www.nuticast.com/images/app-ui/main-window.png)

46-second demo

## Watch Nuticast run an iPhone from Xcode.

Forty-six seconds in the real app: pair the iPhone, choose the mesh, start the bridge and run from Xcode while the phone is on another Wi‑Fi.

Transcript of the Nuticast demo

1. Plug the iPhone into the Mac once, with a cable, to pair it with Xcode.
2. Any mesh VPN works. The demo uses Tailscale, where the Mac and the iPhone both appear in the device list.
3. In Nuticast, click Add Device.
4. Pick the mesh network (Tailscale, ZeroTier, Netbird or Manual IP), choose the iPhone’s mesh device and give it a name, then save.
5. Back in Nuticast, switch on Start Bridge. The device page shows the Bonjour service name, host and port.
6. In Xcode, choose the iPhone as the run destination and run the app. Xcode deploys straight over the mesh.

Prefer text? Read the same steps in [How it works](https://www.nuticast.com/how-it-works).

Customers

## What Nuticast customers say.

> “My main AI computer sits in the office. That’s where I instruct local agents to work with Xcode. I control it a lot from my phone when I’m on the go, and it was super annoying not being able to test the actual builds until I got back in the office. I used TestFlight builds for some time, but oh my god that is so slow (and Apple has daily limits as well).

> Nuticast is exactly what I was after!”

Nuticast customer

iOS developer running AI coding agents on an office Mac

> “Nuticast turned my home Mac mini into a dev machine I can reach from anywhere.”

Nuticast customer

Euneir, iOS student

> “Seems to just work. I build from Xcode on my Mac and the app lands on my iPhone even when we’re not on the same Wi‑Fi. No cable, no TestFlight round trip.”

Nuticast customer

Developer, Ireland

> “Having to rely on TestFlight for testing was really slowing me down. With Nuticast, I can simply debug my iPhone from any network, and that solved the problem for me.”

Nuticast customer

Indie mobile developer, South Korea

> “My work computer stays in one place, but I often need to work from home or other locations. It used to be frustrating not being able to access my setup when I needed it. Nuticast made things much easier and gave me the flexibility to work from wherever I am.”

Nuticast customer

iOS developer, Germany

Quotes are used with the customers’ permission and credited the way they asked.

## Built and supported by one iOS developer.

### Why this exists

I’m Taha Yasin Kucuk. I needed to debug on a real device when I wasn’t near my Mac, and the Simulator wasn’t enough. Once the mesh VPN bridge was solid for my own workflow, I shipped it. I added ZeroTier and Netbird when other developers asked for them.

[About Nuticast](https://www.nuticast.com/about)

### What it doesn’t do

- No account, no sign-in, no telemetry.
- No cloud relay. Traffic stays on your mesh VPN or between your own Macs.
- No replacement for Tailscale, ZeroTier, Netbird or Xcode. It bridges what they already do.
- No cellular. The phone stays on Wi‑Fi.

Check it yourself: [GitHub](https://github.com/webwarrior06), [the Homebrew tap](https://github.com/webwarrior06/homebrew-tap), [the Claude plugin](https://github.com/webwarrior06/nuticast-claude-plugin), [the Codex plugin](https://github.com/webwarrior06/nuticast-codex-plugin) and [what leaves your Mac](https://www.nuticast.com/privacy).

## Recently shipped in Nuticast.

[Full changelog](https://www.nuticast.com/changelog)

1. 1.0.20 16 November 2026
  New: Device Symbols.
2. 1.0.19 10 November 2026
  New: USB Sharing.
3. 1.0.18 22 October 2026
  New: when an update is out, Nuticast shows a Download and Install button.

## Questions about Nuticast

[All questions](https://www.nuticast.com/faq)

### What is Xcode remote debugging?

It’s debugging a physical iPhone from Xcode when the phone isn’t on your Mac’s Wi‑Fi. Apple’s built-in wireless debugging relies on local-network discovery (Bonjour/mDNS), so it stops working the moment the device joins another network. Nuticast bridges that gap over a mesh VPN (Tailscale, ZeroTier, or Netbird) so Xcode can still find and debug the iPhone on a different Wi‑Fi, from home or another office. Cellular doesn’t work. If the iPhone is plugged into another computer instead (a Mac, or a Windows PC running Nuticast USB Host), Nuticast shares that computer’s cable with your Xcode.

### Which mesh VPNs does Nuticast support?

Tailscale, ZeroTier, and Netbird have dedicated support, plus a Manual IP option that works with any other mesh VPN. For the Remote Wi‑Fi route, whichever you use must already be installed and signed in on both your Mac and iPhone, on the same network. (On the USB via computer route the iPhone needs no VPN; only the two Macs have to reach each other.) Nuticast only keeps Xcode’s wireless debugging working over that connection. It doesn’t replace the VPN itself.

### Can I use Nuticast for free?

Partly. Discovery and pairing are free, so you can install Nuticast, add your iPhone and see that it is found before you pay. Bridging a device, the step that makes it a run destination in Xcode, needs a license on the Mac that runs Xcode: Personal is $49 per year, with a 14-day refund. There is no time-limited trial. Sharing a cabled iPhone from another computer (the USB host, a Mac or a Windows PC) is free, so that computer needs no license.

## Download it. Pair for free.

Discovery and pairing cost nothing. Bridging needs a license on the Xcode Mac: $49 per year, with a 14-day refund if it does not work for your setup.

[Download for Mac](https://www.nuticast.com/download/Nuticast.dmg) [Send this to my Mac](mailto:?subject=Nuticast%20for%20my%20Mac&body=https%3A%2F%2Fwww.nuticast.com%2Fdownload) Shares the download link with your Mac. [See pricing](https://www.nuticast.com/pricing)

## Buying for a team?

Team is $80 per seat per year: one seat for each developer who builds. A shared Mac with a cabled iPhone needs no seat.

[Team pricing](https://www.nuticast.com/pricing)

Updated 10 November 2026
