Skip to content

Debug your iPhone in Xcode, even on another Wi‑Fi or plugged into another computer.

Nuticast is a Mac app that makes your own iPhone a normal Xcode run destination. It works on another Wi‑Fi over the Tailscale, ZeroTier or Netbird you already run, or with the iPhone plugged into another computer, a Mac or a Windows PC.

New USB via computer: share a cabled iPhone
Download for MacSend this to my MacShares the download link with your Mac.See pricing
  • Free to pair
  • $49/year to bridge
  • 14-day refund
  • No account
  • Not over cellular

Works over the mesh VPN you already run

  • Tailscale logoTailscale
  • ZeroTier logoZeroTier
  • Netbird logoNetbird
  • or Manual IP
  • The phone stays on Wi‑Fi

    A different Wi‑Fi from your Mac is fine. Cellular does not work.

  • One mesh on both ends

    Tailscale, ZeroTier or Netbird on the Mac and the iPhone. A cable on another computer needs neither.

  • Paired once

    Pair the iPhone with your Xcode Mac one time, while it is next to you.

Version 1.0.19, released 10 November 2026, 2.9 MB. Requires macOS 13.5+, Xcode 15+ and iOS 17+.

How the bridge works

Why Xcode cannot see an iPhone on another network.

Xcode finds wireless iPhones with Bonjour, and Bonjour stays inside one network. Nuticast replays the phone’s record on your Mac and relays Xcode’s traffic over your own mesh VPN, so the phone shows up in the run destination menu and debugs as usual.

  1. iPhoneiPhone-MikeOn a different Wi‑Fi from your Mac. Not cellular.
  2. Your mesh VPNTailscaleOr ZeroTier, Netbird or a manual IP. The one you already run.
  3. Your MacNuticastReplays the phone’s Bonjour record and relays Xcode’s traffic on tunnel ports in the 55000–58000 range, opened as Xcode needs them.
  4. XcodeRun destinationiPhone-Mike is listed and ready.
The Remote Wi‑Fi route, hop by hop. The phone stays on Wi‑Fi; Xcode sees it as if it were next to the Mac.

Read the full explainer

Two routes

One Xcode. Two routes to the phone.

Remote Wi‑Fi

The iPhone sits at home or in the office, on a Wi‑Fi your Mac is not on.

  • Tailscale, ZeroTier or Netbird on the Mac and the iPhone, or a manual IP
  • The iPhone on Wi‑Fi, not cellular
  • A license on the Xcode Mac, $49/year
How Remote Wi‑Fi works
The Nuticast device page: the Bonjour service name, host and RemotePairing port, and the Tailscale device, IP and tunnel port range

USB via computer

The iPhone is plugged into another computer: a Mac mini on a shelf, a teammate’s Mac or a Windows PC.

  • Nuticast on the Mac with the cable
  • The iPhone needs no Wi‑Fi and no VPN
  • No license on the Mac with the cable
How USB Sharing works
Nuticast USB Sharing with the bridge active between two Macs and an iPhone

Remote Wi‑Fi and USB via computer compared

Compared onUSB via computerRemote Wi‑Fi
Where the phone isPlugged into another computer: a Mac mini on a shelf, a teammate’s Mac or a Windows PC.On a different Wi‑Fi from your Mac.
What the phone needsA data cable. No Wi‑Fi and no VPN.Wi‑Fi (cellular does not work) and the same mesh VPN as your Mac: Tailscale, ZeroTier or Netbird, or a manual IP.
What links it to your MacThe two Macs reach each other, over a mesh VPN or the local network.Your mesh VPN, between your Mac and the iPhone.
Which Mac needs a licenseOnly the Mac with Xcode ($49 per year, or $80 per seat per year on Team). The Mac with the cable runs USB Sharing for free.The Mac with Xcode ($49 per year).
What Xcode seesA normal run destination. It builds, installs and debugs over the other Mac’s cable.A normal wireless run destination. Nuticast replays the phone’s Bonjour record and relays Xcode’s traffic over your mesh.

Running an AI coding agent on the Xcode Mac? nuticast mcp lets Claude Code or Codex build to the phone.

The app

What the Nuticast app does for you.

Nuticast shows each iPhone’s state.
Nuticast labels every phone Off, Pairing, Bridge active or Error, instead of a silent Xcode failure.
Nuticast restores the bridge on its own.
When your Mac changes Wi‑Fi or the VPN reconnects, Nuticast restarts the active bridge.
Nuticast finds your mesh devices.
Nuticast discovers Tailscale and Netbird devices through their command line. For ZeroTier, paste the device’s IP.
Nuticast lists its tunnel ports.
The tunnel ports, 55000–58000, are listed in the app, so you can see what Xcode is talking to.
The Nuticast device page: Mike’s iPhone with Bridge active and the live path to the Mac, above its Bonjour service name, host and RemotePairing port

46-second demo

Watch Nuticast run an iPhone from Xcode.

Forty-six seconds in the real app: pair the iPhone, choose the mesh, start the bridge and run from Xcode while the phone is on another Wi‑Fi.

Transcript of the Nuticast demo
  1. Plug the iPhone into the Mac once, with a cable, to pair it with Xcode.
  2. Any mesh VPN works. The demo uses Tailscale, where the Mac and the iPhone both appear in the device list.
  3. In Nuticast, click Add Device.
  4. Pick the mesh network (Tailscale, ZeroTier, Netbird or Manual IP), choose the iPhone’s mesh device and give it a name, then save.
  5. Back in Nuticast, switch on Start Bridge. The device page shows the Bonjour service name, host and port.
  6. In Xcode, choose the iPhone as the run destination and run the app. Xcode deploys straight over the mesh.

Prefer text? Read the same steps in How it works.

Customers

What Nuticast customers say.

“My main AI computer sits in the office. That’s where I instruct local agents to work with Xcode. I control it a lot from my phone when I’m on the go, and it was super annoying not being able to test the actual builds until I got back in the office. I used TestFlight builds for some time, but oh my god that is so slow (and Apple has daily limits as well).

Nuticast is exactly what I was after!”

Nuticast customer
iOS developer running AI coding agents on an office Mac
“Nuticast turned my home Mac mini into a dev machine I can reach from anywhere.”
Nuticast customer
Euneir, iOS student
“Seems to just work. I build from Xcode on my Mac and the app lands on my iPhone even when we’re not on the same Wi‑Fi. No cable, no TestFlight round trip.”
Nuticast customer
Developer, Ireland
“Having to rely on TestFlight for testing was really slowing me down. With Nuticast, I can simply debug my iPhone from any network, and that solved the problem for me.”
Nuticast customer
Indie mobile developer, South Korea
“My work computer stays in one place, but I often need to work from home or other locations. It used to be frustrating not being able to access my setup when I needed it. Nuticast made things much easier and gave me the flexibility to work from wherever I am.”
Nuticast customer
iOS developer, Germany

Quotes are used with the customers’ permission and credited the way they asked.

Built and supported by one iOS developer.

Why this exists

I’m Taha Yasin Kucuk. I needed to debug on a real device when I wasn’t near my Mac, and the Simulator wasn’t enough. Once the mesh VPN bridge was solid for my own workflow, I shipped it. I added ZeroTier and Netbird when other developers asked for them.

About Nuticast

What it doesn’t do

  • No account, no sign-in, no telemetry.
  • No cloud relay. Traffic stays on your mesh VPN or between your own Macs.
  • No replacement for Tailscale, ZeroTier, Netbird or Xcode. It bridges what they already do.
  • No cellular. The phone stays on Wi‑Fi.

Check it yourself: GitHub, the Homebrew tap, the Claude plugin, the Codex plugin and what leaves your Mac.

Recently shipped in Nuticast.

Full changelog
  1. 1.0.19 10 November 2026

    New: USB Sharing.

  2. 1.0.18 22 October 2026

    New: when an update is out, Nuticast shows a Download and Install button.

  3. 1.0.17 20 October 2026

    nuticast mcp now works with OpenAI Codex, which used to be rejected when it opened the connection.

Questions about Nuticast

All questions

What is Xcode remote debugging?

It’s debugging a physical iPhone from Xcode when the phone isn’t on your Mac’s Wi‑Fi. Apple’s built-in wireless debugging relies on local-network discovery (Bonjour/mDNS), so it stops working the moment the device joins another network. Nuticast bridges that gap over a mesh VPN (Tailscale, ZeroTier, or Netbird) so Xcode can still find and debug the iPhone on a different Wi‑Fi, from home or another office. Cellular doesn’t work. If the iPhone is plugged into another computer instead (a Mac, or a Windows PC running Nuticast USB Host), Nuticast shares that computer’s cable with your Xcode.

Which mesh VPNs does Nuticast support?

Tailscale, ZeroTier, and Netbird have dedicated support, plus a Manual IP option that works with any other mesh VPN. For the Remote Wi‑Fi route, whichever you use must already be installed and signed in on both your Mac and iPhone, on the same network. (On the USB via computer route the iPhone needs no VPN; only the two Macs have to reach each other.) Nuticast only keeps Xcode’s wireless debugging working over that connection. It doesn’t replace the VPN itself.

Can I use Nuticast for free?

Partly. Discovery and pairing are free, so you can install Nuticast, add your iPhone and see that it is found before you pay. Bridging a device, the step that makes it a run destination in Xcode, needs a license on the Mac that runs Xcode: Personal is $49 per year, with a 14-day refund. There is no time-limited trial. Sharing a cabled iPhone from another computer (the USB host, a Mac or a Windows PC) is free, so that computer needs no license.

Download it. Pair for free.

Discovery and pairing cost nothing. Bridging needs a license on the Xcode Mac: $49 per year, with a 14-day refund if it does not work for your setup.

Download for MacSend this to my MacShares the download link with your Mac.See pricing

Buying for a team?

Team is $80 per seat per year: one seat for each developer who builds. A shared Mac with a cabled iPhone needs no seat.

Updated