Share a test iPhone with every Mac on your team
By Taha Yasin KucukPublished 2 min read
Short answer: plug the test iPhone into a Mac that stays on (a spare Mac mini is the usual choice) and run Nuticast on it with USB Sharing switched on. Each developer adds the phone in Nuticast on their own Mac with the USB via computer connector, and Xcode builds, installs and debugs on it over the Mac mini's cable. The phone needs no Wi‑Fi. Only the developers' Macs need a license; the Mac mini doesn't. Today one Mac shares one iPhone, so a second test phone needs a second sharing Mac.
Why teams end up here
A small iOS team usually has a drawer of test devices: an old iPhone for the lowest supported iOS, a small screen, a large one, an iPad. They get passed around, go flat, or sit in someone's bag when you need them. Putting one on an always-on Mac keeps it charged and in one place, but until now Xcode could only use it from that Mac.
What you need
- A Mac that stays on, with the test phone cabled to it. Nuticast runs on macOS 13.5 or later. Any team member's Mac works too.
- Nuticast on that Mac and on every developer's Mac.
- A network between them. A mesh VPN such as Tailscale, ZeroTier or Netbird is best: it works from home too, and only VPN members can reach the phone.
- The phone paired once with each developer's Xcode, next to their Mac.
Set up the Mac mini
- Plug in an iPhone, unlock it and tap Trust.
- Open Nuticast → USB Sharing and switch it on.
- Pick the address to share over. Use the Mac mini's mesh VPN address; a local-network address lets anyone on that network reach the phone's debugging port, and Nuticast warns you about that.
On a headless Mac mini, nuticast share does the same from the terminal.
Add a phone on a developer's Mac
- Pair the phone with this Mac's Xcode once, if it isn't yet.
- In Nuticast: Add Device → pick the phone → connector USB via computer → paste the Mac mini's address → Check → Save.
- Start the bridge. The phone appears in Xcode's run destinations.
From the terminal:
nuticast add --device "iPhone-SE" --usb 100.101.102.103
nuticast up iPhone-SE --detach
Day to day
- One developer per phone at a time. It's the same as passing a phone around: two debuggers on one device get in each other's way.
- If the Mac mini restarts, the bridge on each developer's Mac goes into an error state with the reason and recovers by itself once the Mac mini is back.
- AI coding agents on a developer's Mac can use the same phone through
the
nuticastcommand line. See AI agents.
Licensing
Only the Macs that run Xcode and start a bridge need a license. The Mac mini with the cables runs USB Sharing for free. For a team that's one Team seat per developer.
Common questions
Can one Mac share several iPhones? Not yet: a sharing Mac shares one iPhone at a time. Plug in the phone you need, or use one sharing Mac per phone.
Does the phone need Wi‑Fi? No. On this route it only needs the cable.
Is the traffic sent through Nuticast's servers? No. There's no account and no relay; traffic goes straight between your Macs over your own network or mesh VPN.